This electrostatic powder coating machine has a large 45L powder capacity, which means its great for big projects. The T-Mech machine is fully portable, has an easy to navigate control panel and comes with a 12 month electrical warranty!

Powder coating is used to create a durable and high quality finish, which is great for tough machinery! Powder coated products are more resistant to corrosion, fading and chipping so when done correctly it should last a very long time.

Powder coating is a dry finishing process using powder particles that are electrostatically charged and sprayed onto grounded metal work. After the coating is applied, you need to cure the parts using a powder coating curing oven.

Powder coating machines are used in a range of industries including auto parts, medical equipment, home appliances and much more!

Powder Coating Machine

• Product features:
• Easy to navigate control panel
• Includes 1 spray gun
• Comes on wheels making it fully portable
• 12 month electrical warranty
• CE Approved
• Dimensions: 74cm (H) x 65cm (W) x 50cm (D)
• Free next working day UK mainland delivery

Specifications:

• Input Power Voltage: 220V 230V AC
• Frequency: 50Hz-60Hz
• Input Power: 40W
• Electromagnetic valve control power voltage: 24V DC
• Input Air Pressure: 0-0.6Mpa
• Output Air Pressure: 0-0.5Mpa
• Max. Air Consumption: 13.2m3/h
• Output Powder Volume: Max. 600g/min
• Output Powder Voltage: 0-100KV
• Output Current: 0-150uA
• Powder Hopper Volume: 45L

Electrical data

• Nominal input voltage: 200-240V
• Rated output voltage (to gun): 24V
• Rated output current (to gun): 1.2A
• Protection type: IP54
• Temperature range: 0 °C -+40 °C (+32 °F - +104 °F)
• Solenoid Valve Voltage: DC24V
• Gun output voltage: 0-100KV
• Gun output current: 0-150uA

Pneumatical data

• Max. input pressure: 0.8Mpa
• Min. input pressure: 0.5Mpa
• Output pressure: 0.8Mpa
• Max. water vapour content of the compressed air: 1.3g/m3
• Max. oil vapour content of the compressed air: 0.1mg/m3
• Max. compressed air consumption: 13.2m/h（0.4MPa)

Gun Parameter

• Input: 24V
• Voltage Frequency: Around 25KHZ
• Input Current: 1.2A
• Output Voltage: 0~100KV DC
• Max. Output powder volume：Around 600G/MIN
• Gun cable: 6M
• Gun weight: 460G
• Container Capacity: 45L

Operating Instructions

The powder coating should be undertaken by an experienced and competent person. This is in no way an exhaustive and complete guide on how to Powder Coat/Cure.

• You should wear a Tyvek suit/coveralls and gloves to protect your hands and skin. Eye protection and a dust mask should be worn at all times.
• Clean the base metal thoroughly and remove any rust or debris from the metal
• Use a high temperature masking tape on the parts you dont want to be powder coated, this can be left on whilst in the oven but needs to be removed quickly afterwards
• Turn on the power supply switch and the indicator light should come on
• Adjust the voltage to what is required using the dials on the control panel
• Place powder into the feeding barrel
• Press the switch of the spray gun and adjust it to high voltage
• Apply powder using spray gun
• After applying the powder, be careful not to brush or blow on the powder coat as the powder could fall off and leave you with a less precise finish
• Cure the metal using a powder coating curing oven, normally the object is heated to 175 to 190°C (350 to 375°F) for about 10 to 15 minutes, and allowed to cool