This high-performance portable petrol pressure washer is perfect for home and DIY use, featuring a powerful Hyundai IC210 engine that produces 7hp and 5.6kW of output power. With a pressure of 2990psi/ 206bar and a flow rate of 8.7 litres/minute, this pressure washer is more powerful than most DIY electric pressure washers on the market. With easy assembly and portability, its large 12" puncture-proof wheels and quick release soft-grip handle with integral detergent tank mean this compact unit is super easy to use and move around. It includes engine oil and has a hassle and maintenance-free sealed pump. It is also covered by a 2-year warranty and UK parts back-up for peace of mind.

• Powerful petrol pressure washer powered by a 7hp Hyundai IC210 engine
• Great for home and DIY use- perfect for cleaning patios and driveways
• Easy assembly and operation- takes only 5 minutes to set up and start cleaning
• Portable and easy to use with 12" puncture-proof wheels and soft-grip handle
• More powerful than electric pressure washers with 5600w output power

The P1 Petrol Pressure Washer: Your Ultimate Cleaning Solution

Looking for a powerful pressure washer to keep your patio, driveway or garden furniture spick and span? Look no further than the P1 Petrol Pressure Washer.

Hyundai IC210 Engine: Your Partner in Cleaning

The P3500PWA is powered by a Hyundai 212cc 4 stroke petrol engine, producing 7hp and 5.6kW of output power. With such incredible performance, this high-performance petrol jet washer is perfect for home and DIY use.

Petrol vs Electric Pressure Washer: The Difference is Clear

Don't settle for a DIY electric pressure washer when you can have a petrol-powered machine. The P1 Petrol Pressure Washer delivers 2990psi/ 206bar of pressure and a flow rate of 8.7 litres per minute, as compared to just 1400psi to 2000psi / 90bar to 140bar for a typical DIY electric pressure washer.

Quick and Easy Assembly

Assembling the P1 Petrol Pressure Washer is a breeze. Simply insert the stub axles through the wheels and into the holes in the frame and secure them with the R-clips. The upper handle inserts into the lower frame and is held in place by spring-loaded ball connectors. Fill the engine with 600ml of SAE30 engine oil supplied. (Do not overfill). Fill the petrol tank with fresh unleaded petrol. (Do not overfill). Connect the high-pressure hose to the pump and trigger gun with the M22 threaded connectors. Select the nozzle required and push firmly into the lance quick release fitting. Connect your garden hose to the pump inlet using the quick release garden hose connector supplied.

How to Start Your Petrol Power Washer

Starting your P1 Petrol Pressure Washer is easy. Check engine oil level and fuel level, turn on the petrol switch, move the choke lever to the left, and pull the recoil start firmly until the engine starts. Switch the choke lever to the right and you're ready to go!

Important Operating Instructions

Never run the engine without a water supply connected to the pump. The water acts as a coolant and lubricant for the high-pressure pump. Always use fresh mains water. If dirty water is used, it can cause damage to the internal parts of the high-pressure pump. Remember to switch the engine off when not pressure washing to save fuel and wear and tear.

Pressure Washer Nozzles

Choose the nozzle required and push it firmly into the quick release fitting on the lance. For normal pressure washing, hold the nozzle about 30cm from the object being pressure washed. To use the detergent function, place the black nozzle in the lance and the pressure washer will draw the liquid detergent from the built-in tank. This is a low-pressure nozzle, so when the soap has been applied, change back to the high-pressure nozzle to finish cleaning.

Maintenance Tips

Check the engine oil level daily and fill it to the top of the oil filler neck with SAE30 or 15w40 engine oil. Change the engine oil every 100 hours after the first 20 hours. There is an engine drain bolt at the bottom of the engine. Drain into a suitable container and dispose of safely following local guidelines. The high-pressure pump is a sealed for life, maintenance-free unit. Change the air filter and spark plug every 100 hours. Check that there are no leaks in the high-pressure hose. Always store in a frost-free environment. If there is any water left in the pump and it freezes, it can cause major damage to the pump body.

Warranty and Key Features

Covered by a P1 Two Year Warranty* & UK parts back-up for peace of mind. Enjoy easy assembly, powerful performance, and ease of use with the P1 Petrol Pressure Washer.